Custom Oakley FOS900833 Pro-Formance Cap With Your Logo

If you want a custom Oakley hat for your crew, your customers or a golf event, the Oakley FOS900833 Pro-Formance Cap is a straightforward place to start. It is a six-panel snapback made from a performance twill, so it wears lighter than a cotton cap and holds its shape in heat and sun. The front panels are open for your logo, which makes it a clean fit for front embroidery, 3D puff or a leather patch. At Battle Born Clothing in Yerington, Nevada, we decorate it in-house and ship it anywhere in the US.

Specs that matter for decoration

Before you pick a decoration method, it helps to know what you are working with. Here are the facts on this cap:

• Fabric: 98/2 polyester/elastane twill. The small amount of stretch helps comfort, and it also means we back embroidery properly so the front stays smooth.
• Construction: Six-panel with a snapback closure.
• Size: One Size, adjustable with the snap.
• Colors: 5 options: Blackout, Red Line, Stone Grey, Team Navy and White.
• Factory branding: The cap already carries an Oakley bark logo on the left side and an ellipse logo on the back. Plan your artwork around those spots.
• Blank price: The blank starts at $16.32 before decoration.

Best decoration method

For caps, front embroidery is the standard, and it is what most businesses choose on this style. A few options and how we think about each:

Flat embroidery on the front

This is the most durable and most professional-looking option. A typical cap-front logo runs about 2 to 2.25 in. tall and up to roughly 4 to 4.5 in. wide, depending on the shape of your art. Wide, short logos usually look best. Because the twill has a bit of stretch, we use a firm backing and keep the stitch count reasonable so the panel does not pucker. Very fine text under about a quarter inch tall tends to fill in, so we may suggest simplifying small lettering.

3D puff embroidery

Puff adds raised dimension and works best on bold, simple shapes and thick block letters. It is not a good match for thin lines or tiny details. If your logo has both, we can puff the main mark and flat-stitch the fine parts.

Laser-engraved leather patch

We make patch hats in-house with laser-engraved leather patches. A patch gives a rugged look that suits ranches, outdoor brands, contractors and shops. Patches are a good choice when your logo has detail that would be hard to stitch at cap size.

Placement notes and caveats

• Front: Your primary logo goes here.
• Right side: A small secondary mark, web address or tagline can work on the right side, since the left side already carries the Oakley bark logo.
• Back: The back has an Oakley ellipse logo, so we usually skip back decoration on this style or keep it small and away from that mark.
• Color contrast: On Blackout and Team Navy, light thread or a natural leather patch pops. On White and Stone Grey, darker thread reads best.

Who orders it

Performance snapbacks like this are a popular corporate pick because they look sharp, breathe well and fit most people with one size. Here are the kinds of groups it suits:

• Golf tournaments and charity events: A branded Oakley cap is an easy player gift or sponsor giveaway.
• Construction and mining crews: Northern Nevada job sites are hot and dusty, and a light polyester cap is more comfortable than heavy cotton in summer.
• Outdoor crews and guides: Landscapers, surveyors, fishing and hunting guides and ranch hands who spend the day in the sun.
• Dealerships, shops and service businesses: Staff hats that match a team look without a full uniform.
• Resorts and hospitality: Front-desk, activity and grounds staff, plus retail merchandise for guests.

Pair it with

If you are building out a full set of branded gear, two Oakley backpacks pair well with this cap: the Oakley 921056ODM 20L Enduro Backpack for an everyday laptop bag, and the Oakley FOS901100 30L Blade Backpack when your team needs more room. Both are 600D polyester and take a logo on the front panel. You can see every Oakley style we carry on our Oakley hub page, or browse all brands we decorate.

How to order

Ordering custom caps from Battle Born Clothing is simple:

• Request a quote. Use our quote request form and tell us the style (FOS900833), colors, quantity and how you want the logo done. You can also call 775-230-0211 or email sales@battlebornclothing.com.
• Send your artwork. Vector files give the cleanest result. See our artwork requirements for what works best.
• Approve your proof. Every order gets a proof. If we get it wrong against the approved proof, we reprint it free under our quality reprint guarantee.
• Production and delivery. Turnaround is about 21 days (three weeks) from an approved proof. Need it sooner? Rush is quoted per job, see turnaround and rush orders. Pick up free in Yerington or have it shipped anywhere in the US (shipping policy).

Embroidery has no minimum, so you can order a handful of caps or a few hundred. For decoration pricing, check our pricing page. If you already have caps, we can decorate customer-supplied goods for a $2 per item handling fee; plan for about 4% spoilage. Ready to start? Head to the FOS900833 product page to see colors.

FAQ

Is there a minimum order for embroidered Oakley caps?

No. Embroidery has no minimum, so you can order as few caps as you need. Leather patch hats are a good option for small runs too.

Can you embroider on the side or back of this cap?

The left side has an Oakley bark logo and the back has an ellipse logo, so the front is the main spot. A small mark on the right side is usually the best secondary placement.

How long does a custom cap order take?

About 21 days (three weeks) from your approved proof. Rush timing is quoted per job, so ask when you request your quote.