Custom Outdoor Research OR322228 800 Tech Down Jacket

When a company wants a real cold-weather jacket with its logo on it, something people keep for years instead of tossing in a closet, the Outdoor Research OR322228 800 Tech Down Jacket belongs on the short list. It is a high-end piece for leadership gifts, top-performer awards, client appreciation and field staff who work through Northern Nevada winters. It takes a logo well because Outdoor Research left the left chest open for decoration. Down does need a careful approach, though, and that is what this guide covers. Battle Born Clothing decorates it in-house in Yerington, Nevada, and ships anywhere in the US.

Specs that matter for decoration

• Shell: Pertex Quantum ripstop with anti-abrasion Diamond Fuse technology, made with bluesign approved materials. It is light and tightly woven, which matters when a needle goes through it.
• Insulation: 12.6 ounces of RDS-certified 800+ fill-power down throughout.
• Weather protection: water-resistant and wind-resistant.
• Features: reverse coil center front zipper with no-snag webbing behind it, brushed tricot-lined zippered hand pockets, dual interior stash pockets, Low-Pro Binding at the cuffs and a clean-finished elastic drawcord hem.
• Packable: the left hand pocket doubles as a stuff sack for the jacket.
• Factory branding: a contrast heat transfer OR logo on the left sleeve. The left chest is open for your logo.
• Sizes: S, M, L, XL, XXL and XXXL.
• Colors: 2 options, Black and Naval Blue.
• Blank price: the blank starts at $208.75 before decoration.

This style is listed as a limited edition Outdoor Research piece, available while supplies last. If you need matching jackets for a large team, check availability with us before you finalize headcount.

Best decoration method

Down jackets are built from stitched channels, often called baffles, that keep the insulation evenly spread. How you decorate around those channels decides whether the result looks clean or lumpy.

Heat-applied DTF transfers

For many down orders, a DTF transfer is the safer choice. It goes on with heat and pressure instead of a needle, so there are no new holes in the shell and no path for down to work its way out. DTF also handles full-color logos and fine detail. We use time and temperature settings suited to lightweight technical shells and test on the fabric before running the order.

Embroidery, done carefully

Embroidery is still possible and some clients prefer the look of thread on a premium jacket. If you go that route:

• Stay inside one channel. We size the logo to fit within a single baffle and never stitch across the seams between them. Stitching across baffles flattens the down and distorts the logo.
• Keep it small and light. A simple, lower stitch-count design holds up better than a dense fill on a loft-filled jacket.
• Expect a little feathering. Every needle hole is a tiny opening, and down can work through over time. Smaller logos with fewer stitches reduce that.

Placement suggestions

• Left chest: the go-to location, usually 3 to 4 in wide depending on the channel height. We measure the channel on the actual jacket before setting the final size.
• Right sleeve: a small secondary mark works here, since the left sleeve carries the OR logo.
• Upper back: possible with a heat-applied transfer sized to fit between baffle lines.

Who orders it

Because of its price point, this jacket usually shows up in programs where the gift needs to mean something. In Northern Nevada we see that fit for mining and energy companies recognizing safety milestones, construction firms outfitting project managers, ranches and agriculture operations, and ski and resort businesses around Tahoe. Nationwide, it is a popular corporate pick for executive teams, sales incentive trips, board gifts and client appreciation. The packable design also makes it easy for traveling staff to carry.

Pair it with

The Outdoor Research hub has the rest of the lineup. Two good companions:

• OR322267 Tech Grid 1/4-Zip Fleece: a midlayer that goes under the down jacket on the coldest days and works alone in spring and fall.
• OR322264 Grid Soft Shell Jacket: a three-season shell for team members who need weather resistance more than heavy insulation.

How to order

• Request a quote: send quantities, sizes, colors and placement through our quote request form. General decoration pricing is on our site.
• Send artwork: check our artwork requirements. Vector art gives the cleanest result.
• Approve your proof: every order gets a proof. If we get it wrong against the approved proof, we reprint it free under our quality reprint guarantee.
• Production: about 21 days (three weeks) from an approved proof. Rush is quoted per job; see turnaround and rush orders.
• Pickup or shipping: free local pickup in Yerington, or we ship anywhere in the US under our shipping policy.

Embroidery and DTF have no minimum, so ordering a handful of jackets for a leadership team is no problem. If you are supplying your own jackets, we charge a $2 per item handling fee and you should expect about 4% spoilage. Full blank details are on the OR322228 product page, and you can compare other brands on our brands page. Call 775-230-0211, email sales@battlebornclothing.com, or visit us at 3 Pebble Beach Dr, Yerington, NV 89447.

FAQ

Will embroidery make my down jacket leak feathers?

Any needle hole can let a little down escape over time. Keeping the logo small and inside a single channel limits it, and a heat-applied DTF transfer avoids needle holes altogether.

How big can a left chest logo be on this jacket?

It depends on the channel height on the jacket. Most left chest logos land around 3 to 4 in wide, and we confirm the final size on your proof after measuring the garment.

Is there a minimum order?

No. Embroidery and DTF have no minimum, so you can order a single jacket or outfit a full team.