Custom The North Face ThermoBall Trekker Jacket With Your Logo

A custom North Face jacket with your logo is one of the most appreciated gifts a company can give, and the The North Face NF0A3LH2 ThermoBall Trekker Jacket is a lightweight, packable insulated option for cold-weather crews, leadership teams and client gifts. Because it is built with quilted baffles and synthetic insulation, decorating it takes more care than a fleece or soft shell. Battle Born Clothing in Yerington, Nevada, handles that in-house, and this guide explains the specs, the safest logo placement and how to order.

Specs that matter for decoration

The shell fabric and insulation drive every decoration decision on this jacket:

• Shell: 15D 33 g/m2 100% nylon with a non-PFC durable water-repellent (DWR) finish. The TNF Matte Black color uses a 100% recycled nylon version.
• Insulation: 11.5 g/ft2 ThermoBall synthetic insulation made with 100% recycled polyester polyfill, which retains loft and warmth even when wet.
• Construction: baffles contoured to the body, secure-zip hand pockets, interior left chest zippered pocket, interior elastic cuffs and a hem cinch-cord. It stows in its left hand pocket.
• Brand marks: a contrast embroidered The North Face logo on the left chest and right back shoulder, so your chest logo goes on the right chest.
• Sizes: S, M, L, XL, 2XL and 3XL.
• Color range: 3 colors: Mid Grey, TNF Black and TNF Matte Black.

Blank starts at $202.93 before decoration. At that price point, getting placement right on the first try matters, which is why every order gets a proof.

Best decoration method

Quilted, insulated jackets have one main rule: do not stitch across the baffles. Stitching across a quilt line compresses the insulation, distorts the logo and can leave a visible ridge. Here is how we approach this jacket:

• Size the logo to one channel: we measure the baffle on your chosen size and keep the logo inside a single quilted channel.
• Heat transfer is often safer: a DTF transfer sits on the surface without needle holes, which is gentler on a thin 15D nylon shell. We test press temperature on the fabric first, since lightweight nylon with a DWR finish is heat sensitive.
• Embroidery is possible with care: a small, low-stitch-count logo placed within a channel can work. Dense fills on thin nylon over insulation are more likely to pucker, so we keep designs simple.

Placement suggestions

• Right chest: the main spot, since The North Face logo occupies the left chest. Plan for about 3 to 3.5 inches wide, adjusted to fit the baffle height.
• Left sleeve or upper arm: a small secondary mark, around 2.5 to 3 inches wide, if the sleeve channels allow it.
• Back: large back designs are not a good fit for a quilted jacket because they cross multiple baffles, and the right back shoulder already carries the brand logo.

Who orders it

A packable insulated jacket from a recognizable outdoor brand is a popular corporate pick in general for winter gifts and cold-weather work. Around Northern Nevada and nationwide, it often goes to:

• Mining and energy operations: managers, engineers and safety leads working cold early shifts in high desert country.
• Construction leadership: superintendents and project managers on winter job sites.
• Ski resorts and outdoor hospitality: management and guest services staff near Lake Tahoe and the Sierra.
• Corporate gifting: year-end gifts, sales awards and executive retreats.
• Outdoor crews and guides: a layer that packs into its own pocket for travel and field days.

Pair it with

For a lighter mid layer, The North Face NF0A7V64 Skyline Full-Zip Fleece Jacket takes embroidery more easily and works under a shell. The NF0A47FA Sweater Fleece Vest is another option for office and field staff. Both are on our The North Face hub page.

How to order

Here is how to get custom ThermoBall jackets from Battle Born Clothing:

• Request a quote: send your logo, colors, sizes and quantities through our quote request form, or email sales@battlebornclothing.com or call 775-230-0211. Tell us whether you prefer embroidery or a transfer and we will recommend what fits your logo.
• Prepare your artwork: see our artwork requirements for accepted file types. A simplified version of your logo often works best inside a baffle.
• Approve your proof: every order gets a proof showing size and placement. If we get it wrong against the approved proof, we reprint it free under our quality reprint guarantee.
• Production: turnaround is about 21 days (three weeks) from an approved proof. Rush is quoted per job; see turnaround and rush orders.
• Pickup or shipping: free local pickup at 3 Pebble Beach Dr, Yerington, NV 89447, or shipping anywhere in the US per our shipping policy.

Embroidery and DTF have no minimum. For decoration costs, see our pricing page. Check sizes and colors on the NF0A3LH2 product page, and browse more outerwear brands on our brands page. Customer-supplied jackets are decorated for a $2 per item handling fee, with about 4% expected spoilage.

FAQ

Can you embroider a North Face ThermoBall jacket?

Yes, with limits. We keep the logo small and inside one quilted channel so we do not stitch across baffles. For detailed logos, a DTF heat transfer is often the safer choice.

Where does my logo go if The North Face logo is on the left chest?

The right chest is the standard spot. The brand logo sits on the left chest and right back shoulder, so we place your logo opposite it.

Is there a minimum order?

No. Embroidery and DTF transfers have no minimum, so you can order a few jackets for an executive team or a full crew.